lutron homeworks qs ecosystem

HomeWorks Support

Looking for help we've got you covered, explore knowledge articles.

System Design & Setup

Troubleshooting

Ketra and Lighting

Legacy Upgrades

Lutron Designer

For the most uncompromising home integration projects. Equip yourself and your team with the ultimate in design freedom, innovative technology, and reliable quality with HomeWorks.

Get help your way

How do i find my model number, dimmers & switches, do you have the original packaging.

If your product came in plastic packaging (a clamshell), you’ll find the model number on the front of the insert card, on the lower left corner. If your product came in a box, you’ll find the model number on the top of the box.

Most model numbers are 12-16 characters and start with a couple letters followed by a dash.

No packaging? No problem!

The product number is on a label on the side of the dimmer or switch.*

If you’ve already installed the dimmer/switch, turn off the electricity and then remove the wallplate. Unscrew and remove the wallplate adapter, then unscrew the dimmer/switch and pull it out of the wall until you can see the label.

*Please note: The product number for Ariadni/Toggler dimmers is not on a label. It’s located directly on the front of the dimmer on the top left, or right below the on/off toggle.

• Browse Components

Applied Filter: Plug in Module Clear

If you don't know your model number, try browsing for it here

• HQR-REP-120
• Electronic Low Voltage
• Fluorescent / LED 3-Wire
• Fluorescent 2-Wire
• Hi-Lume LED 2-Wire
• Incandescent / Halogen
• Magnetic Low Voltage
• LMJ-5T-DV-B
• HQRA-F6AN-DV
• HQRD-F6AN-DV
• LQSE-1DAL2-D
• LQSE-2HDC-D
• LQSE-4A5-120-D
• LQSE-4M-120-D
• LQSE-4S8-120-D
• LQSE-4T20-120-D
• LQSE-4T5-120-D
• PHPM-3F-120
• PHPM-PA-120
• HQRA-HN1RLD
• HQRA-HN2RLD
• HQRA-HN3BSRL
• HQRA-HN5BRL
• HQRA-HN6BRL
• HQRA-W3BSRL
• HQRD-HN1RLD
• HQRD-HN2RLD
• HQRD-HN3BSRL
• HQRD-HN5BRL
• HQRD-HN6BRL
• HQRD-W3BSRL
• HQWA-KP5-DN
• HQWA-KP5-DW
• HQWA-KP7-DN
• HQWA-KP7-DW
• HQWA-W1RLDI
• HQWA-W1RLDN
• HQWA-W2RLDI
• HQWA-W2RLDN
• HQWA-W3BSRLI
• HQWA-W3BSRLN
• HQWA-W5BIRI
• HQWA-W5BIRN
• HQWA-W5BRLI
• HQWA-W5BRLN
• HQWA-W6BRLI
• HQWA-W6BRLN
• HQWD-W3BSRL
• HW-NW-KP-S1
• HW-NW-KP-S2
• HW-NW-KP-S3
• Accessories
• HQ-LV21-120
• HWR-PD-8-120FT
• PD10-65T-DV
• PD5-36F-120
• PD9-59F-120
• PDT-T-DV-MF
• PDW-T-DV-MF
• PD2-16F-120
• PD4-36F-120
• PD8-59F-120
• PD8-65A-120L3-15
• PD8-65A-120L3-20
• PD8-65A-120L4-15
• PD8-65A-120L4-20
• PD8-PNL-8-SUB
• HQR-15APS-1
• PNL-8-PWRKIT
• QSPS-DH-1-75-H
• QSPS-J-1-50
• QSPS-P1-1-35V
• Pico Wireless
• PICO-CARVISOR
• PICO-SM-KIT
• PICO-WBX-ADAPT
• Ceiling Mount
• Mullion Mount
• Window Mount
• L-CMDPIRKIT
• LRF2-OCR2B-P
• LRF2-VCR2B-P
• LRF2-OHLB-P
• LRF2-OKLB-P
• LRF2-OWLB-P
• LRF2-VHLB-P
• LRF2-VKLB-P
• LRF2-VWLB-P
• HQRT-G5ANSW
• LMJ-16R-DV-B
• L-HWLV2-WIFI
• LR-TEMP-FLSH
• SMC55-RESI-2

• Applications
• Install & Programming
• LED Compatibility
• Multi-Location Control
• Obsolete Replacement
• Product Facts
• System Compatibility

Yes, it is possible to upgrade from HomeWorks Illumination to HomeWorks QSX. There is a database conversion tool available on myResources which helps to minimize the software work required during the upgrade process by retaining most of the Design and Program tab contents. On the hardware side, legacy panelized equipment (RPM and Specification Grade Panels) can communicate to a QSX processor, on the QS Link, using the Panel Link to QS Link Translator (HQ-MI-LX). Optionally, RPM panelized equipment can be replaced by DIN Rail equipment with the help of the RPM to DIN subplate (PD8-PNL-8-SUB). All other legacy hardware must be replaced including keypads and QED shades. For more information, refer to Application note #840.

Would you like to provide additional feedback? Yes No

• You can use a 0-10V dimming DIN module such as the LQSE-4T5-120-D or the LQSE-4T20-120-D.
• You can use GRX-TVI interfaces to convert line voltage dimming to 0-10V dimming. You can use this interface with controls such as local in-wall dimmers, WPMs, and RPMs.
• If there is an RF link available in the project, you can use the LMJ-5T-DV-B to switch the line voltage and provide the 0-10V dimming signal. This device is normally mounted out of sight in a junction box knockout.

For a list of certified dealers in your area, visit our Where To Buy tool . Enter your zip code, then select "RadioRa 2".

An Ethernet to RS-232 converter device is required to communicate with RS-232 devices from a HomeWorks system since there is no on-board serial port. There are many devices with these capabilities, however, we've had success with the following: Digi One SP and B & B Electronics ES1A. The converter device must open and maintain a Telnet session with the HomeWorks system, which will then allow the Lutron Integration Protocol data to pass through to the RS-232 port. For instructions on properly configuring this connection, please log in to your myLutron account and the follow this link .

Refer to the HomeWorks section of the System Rules Document (pages 6-7). You can also log in to your myLutron account and visit the Service and Support section of lutron.com. There you will find Application Notes along with Product Specification Submittals.

Looking for other products?

No Results Found! Please enter valid model number to search.

• United States
• Middle East
• Latin America

Sivoia QS Wireless Insulating Honeycomb Shades

Insulating Honeycomb Shades represent an evolution in Lutron window treatment operation, as they are the first wire-free, battery-powered shading solution.  

HomeWorks Whole Home Control

Saves energy with unparalleled total home control and easily integrate with third party manufacturers to control lights and shades. All equipment and temperature controls from a single keypad.

• App & Integration

Tools & Downloads

For over three decades, homeworks has been redefining expectations around the seamless control of light in a home. bringing together a legacy of best in class dimming technology, window coverings and now, fixtures, the next generation of homeworks raises the bar on creating beautiful light throughout the home., exceptional aesthetics.

Complement interior décor with sophisticated, intuitive controls, and create the perfect scene with a single button press. Keypads are available in a variety of styles and finishes and customisable to fit your needs. The Alisse Wall Control is an elegant, balanced and versatile control that curates magical lighting experiences at the touch of a button. Choose from a palette of exquisite metal finishes to complement any interior.

Refined daylight control

Energise your mornings with natural light, while ensuring privacy when you want it. Quiet automated blinds work at the touch of a button or through a personalised schedule. Our blinds solutions feature an expertly curated fabric collection to coordinate with your interior design.

A transformative environment

Experience unequaled lighting control that can transform a space in accordance with your mood or the task at hand. HomeWorks delivers an unlimited palette of personalised scenes that is yours to design, control and enjoy.

Smart living

Your lighting  can automatically know when you come and go. You can also control lights, blinds, and temperature when you are away - around the block or around the world— so you can always keep an eye on your home.

The power of voice

Set the perfect atmosphere or activate lighting that is right for the task at hand  - Lights  come on. Blinds open. Your favorite playlist fills the background - at your command.

The Lutron Difference

Our innovation, quality, and service remain the foundations of our company. When you choose Lutron, you can trust that your system, with its powerful controls, intelligent blinds, and beautiful light, will work as it’s supposed to, every time. Because we have the highest confidence in the quality of our products, HomeWorks is backed by an 8-year warranty. Our solutions are also backed by industry-best 24/7 technical support, so you can always reach us.